Re Staining A Deck Using A Different Color

Before you re-recolor a deck, there are a couple of steps you should take to plan and prepare the deck to assimilate the new shading. On the off chance that this is the first run through deck stain shading will be connected to the outside of your deck, you’ll have marginally less prep work to do. For the individuals who have a deck with stain officially connected, there is the additional progression of ensuring that the old shading is expelled before you begin.

Stage One to re-recolor a deck

Begin by looking once again the state of the deck. Ensure there are no free nails or spoiling sheets before you begin attempting to re-recolor a deck. Check the sheets for indications of fragmenting or decay. Fix any issues you find before you continue with recoloring the deck.

Stage Two to re-recolor a deck

Expel any current deck stain shading utilizing a paint stripper or sander. Ensure the paint or stain is consistently expelled from the wood surface and no patches remain. This will enable your new stain to appear to be identical over all aspects of the deck. When the majority of the shading is expelled, you can continue to cleaning the deck.

Stage Three to re-recolor a deck

Utilize a wood deck cleaning item alongside a weight washer to clean the deck. Weaken the cleaning arrangement as indicated on the item bundle and hold up until multi day where the breeze is low and no downpour is conjecture. As you wash the deck, utilize the most minimal weight setting on the washer to abstain from harming the outside of the wood. Utilizing a wide shower over the majority of the sheets will enable you to evacuate the majority of the soil. Enable the deck to dry medium-term before you continue to sanding the deck.

Stage Four to re-recolor a deck

When the deck has dried, you may see more fragments and unpleasant fixes along the surface than previously. This is because of the weight washing and the ordinary development of the wood as it dries. To get the wood surface smooth again before you recolor it, utilize a power sander to sand the boards.

Stage Five to re-recolor a deck

Select the new stain shading and completion for your fence. Utilize a brilliant fiber brush to apply the new stain onto the little zones, for example, the hand railings, stairs and implicit racks. Work your way down these zones start to finish to evade any dribbles showing up in the completed item.

Stage Six to re-recolor a deck

Hold up 48 hours before you recolor the outside of the deck. This will give the boards time to dry and be prepared to retain the stain you apply. On the off chance that the deck gets wet because of any downpour, hold up an additional 48 hours to permit enough time for the water retained to dry. Utilize a paint cushion to apply the stain in wide, even strokes on the deck. Enable the principal layer of stain to completely dry before you choose whether or not to apply another coat.

When these means are finished, your recently recolored deck will be prepared to appreciate. Over the initial couple of months, the shade of your deck may change somewhat as the stain settles. You may decide to re-seal the deck a couple of months after the fact to draw out the life of the new stain.

Thanks so much to the following company for supporting my blog!

Hardwood Floor Refinishing Seattle
2623 NE University Village St, #11
Seattle, WA 98105
206-203-3536

https://www.hardwoodfloorrefinishingseattle.com/